Skip to content
Variable speed drives and isolators mounted on a plant room wall

Energy Performance

Lower bills start with better information.

Energy and power quality audits for commercial and industrial sites across Victoria, and the work to fix what the data shows.

What site owners usually find.

A bill with charges nobody can explain. A power factor penalty that's been there for years. A supply upgrade quoted before anyone checked the site needs one.

We put loggers on site for a full billing cycle, then show you where the money is going and what it costs to fix.

See how we workAerial view of a new warehouse with a solar array on the roof

What we do

Measure first, then fix what's worth fixing.

Every job starts with the audit. What follows depends on what the data says, and sometimes the answer is that nothing on site is worth changing.

Where we find the savings

A factory, a cold store and a multi-tenanted building all waste money differently. These are the sites we know best.

Request an energy audit

Manufacturing and Processing

A handful of large loads usually set the site peak, and the demand charge follows them. Motors, compressors and process plant are where most of the money sits.

  • Load profiling across the main plant items
  • Staging and sequencing to bring the peak down
  • Power factor correction, with harmonics assessed first
  • Metering by process, so each line can be costed
Electrician on a ladder installing a switchboard in a new warehouse

Cold Storage and Food Processing

Refrigeration runs around the clock, so anything inefficient costs money every hour rather than only during trading.

  • Full billing cycle logging across refrigeration load
  • Power quality issues affecting motors and compressors
  • Demand management on defrost and plant cycling
  • Monitoring, so a change in consumption shows up early

Warehousing and Logistics

Steady daytime load, large roof areas and lighting that runs for most of it, which makes these sites straightforward to measure and improve.

  • Lighting load assessment across the warehouse floor
  • Power factor correction on racking and dock equipment
  • Commercial solar sized against the measured load
  • Metering across warehouse, office and dock

Multi-Tenanted Commercial

Shared services make it hard to see who is using what, and harder again to recover it fairly.

  • Sub-metering by tenancy, floor or service
  • Cost recovery based on measured usage
  • Base building load assessment
  • Reporting owners and tenants can both rely on

Our process

The Full Circuit Method

Every recommendation on an energy job should be traceable back to something we measured. That's what the first stage is for, and it's why the rest of it holds up.

An energy job is only as good as the data behind it. The four stages are how we get that data first, then act on what it actually shows.

On an energy job, that means:

  • Loggers on site for a full billing cycle before we recommend anything.
  • What each fix costs, and what it saves, so you can decide what's worth doing.
  • Design, supply, install and commission, all by our own licensed team.
  • Monitoring, so you can see the change rather than take our word for it.
See how we work

Case Studies

  • Energy Performance
  • Commercial Build

Monitoring designed in, not added later.

CT metering on every tenancy, Wattwatchers energy monitoring and smart water meters, from day one.

  • Two buildings monitored for energy and water
  • Commissioned once the platform was ready
View case study
Aerial view of a new warehouse on Enterprise Road, Pakenham

Testimonial

“Working alongside the team at Positive Electrics has been an absolute pleasure. The partnership between Positive Electrics and Zinfra has been built on a foundation of trust, responsiveness, and a genuine commitment to achieving the best outcomes for our customers and projects.”
Craig Booth, Area Manager Distribution Services (Zinfra)
  • Energy Safe VictoriaLicensed with Energy Safe Victoria. REC 17537.
  • Solar Accreditation AustraliaAccredited designer and installer for commercial systems.
  • Rapid GlobalCM3, Avetta or Rapid Global, whichever PE is registered on.
  • NECAMembership number: 15284

Worth knowing what your site is really paying for.

Contact us